RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
(a) Remove the 3 screws.
(b) Using a clip remover, disengage the 7 clips and 2 rear door trim board retainers.
Text in Illustration
(c) Pull out the rear door trim board sub-assembly in the direction indicated by the arrow as shown in the illustration.
(d) Raise the rear door trim board sub-assembly to disengage the 4 claws and remove the rear door trim board sub-assembly together with the rear
door inner glass weatherstrip.
(e) for 12 Speakers or 15 Speakers:
(1) Disconnect the connector.
(f) Disconnect the rear door lock remote control cable assembly and rear door inside locking cable assembly as shown in the illustration.
(g) Remove the 2 rear door trim board retainers (green) from the rear door trim board sub-assembly.
9. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP
(a) Using a moulding remover, disengage the 4 claws and remove the rear door inner glass weatherstrip from the rear door trim board
sub-assembly as shown in the illustration.