RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Heating Temperature
NOTICE:
Do not heat the vehicle body or rear door panel protector excessively.
(a) Using a heat light, heat the rear door panel protector.
(b) Disengage the 11 clips, guide and remove the rear door panel protector as shown in the illustration.
Text in Illustration
35. REMOVE NO. 2 ACCESS PANEL WEATHERSTRIP
HINT
When removing the No. 2 access panel weatherstrip, heat the vehicle rear door panel protector and No. 2 access panel weatherstrip
using a heat light.
Heating Temperature
NOTICE:
Do not heat the rear door panel protector or No. 2 access panel weatherstrip excessively.
(a) Using a heat light, heat the No. 2 access panel weatherstrip.
(b) Disengage the 5 clips and remove the No. 2 access panel weatherstrip.
Text in Illustration
36. REMOVE REAR DOOR OUTSIDE MOULDING SUB-ASSEMBLY See: Exterior Moulding / Trim/Lower Side Moulding / Trim/Service and
Repair/Removal