RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
4.
INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL
(a) Connect the connector.
(b) Engage the 2 clips and 3 claws, and install the rear power window regulator switch assembly with rear door armrest base panel.
5.
INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG
(a) Engage the 3 claws and install the rear door inside handle bezel plug.
6.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
7.
INITIALIZE POWER WINDOW CONTROL SYSTEM
See: Windows and Glass/Windows/Testing and Inspection/Programming and Relearning/Initialization
8.
INSTALL REAR DECK FLOOR BOX See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and Replacement/Installation
9.
INSPECT SRS WARNING LIGHT
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System