RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
(b) Disengage the clamp and remove the hood lock control cable cover.
21. REMOVE HOOD LOCK ASSEMBLY
(a) Using a screwdriver, remove the hood lock nut cap.
Text in Illustration
HINT
Tape the screwdriver tip before use.
(b) Remove the 2 bolts and hood lock nut.
(c) Disconnect the connector.
(d) Disconnect the hood lock control cable and remove the hood lock assembly.
22. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
23. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
(a) Disengage the 3 claws.