RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
14. REMOVE BACK DOOR OPENER SWITCH ASSEMBLY
(a) Remove the back door opener switch assembly.
Installation
DOOR / HATCH: BACK DOOR OPENER SWITCH: INSTALLATION
1. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY
(a) Install the back door opener switch assembly.
2. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY
3. INSTALL BACK DOOR TRIM PANEL ASSEMBLY See: Service and Repair/Overhaul/Reassembly
4. INSTALL BACK DOOR SERVICE HOLE COVER LH See: Service and Repair/Overhaul/Reassembly
5. INSTALL BACK DOOR SERVICE HOLE COVER RH See: Service and Repair/Overhaul/Reassembly
6. INSTALL BACK DOOR UPPER TRIM COVER LH See: Service and Repair/Overhaul/Reassembly
7. INSTALL BACK DOOR UPPER TRIM COVER RH See: Service and Repair/Overhaul/Reassembly
8. INSTALL NO. 2 ROOM LIGHT ASSEMBLY See: Lighting and Horns/Trunk Lamp/Service and Repair/Installation
9. INSTALL BACK DOOR LOCK COVER See: Service and Repair/Overhaul/Reassembly
10. INSTALL BACK DOOR FINISH COVER LH (w/o Power Back Door) See: Service and Repair/Overhaul/Reassembly
11. INSTALL BACK DOOR TRIM BASE (w/ Power Back Door) See: Service and Repair/Overhaul/Reassembly
12. INSTALL BACK DOOR FINISH COVER RH (w/o Power Back Door) See: Service and Repair/Overhaul/Reassembly
13. INSTALL DOOR PULL HANDLE WITH SWITCH (w/ Power Back Door) See: Service and Repair/Overhaul/Reassembly
14. INSTALL TONNEAU COVER SUB-ASSEMBLY