RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
NOTICE:
*
If reusing the name plate, take care not to damage the No. 1 back door name plate.
*
Be careful not to damage the vehicle body.
2. REMOVE NO. 2 BACK DOOR NAME PLATE
(a) Put protective tape around the No. 2 back door name plate.
Text in Illustration
(b) Using a moulding remover, peel off the double-sided tape to remove the No. 2 back door name plate.
NOTICE:
*
If reusing the name plate, take care not to damage the No. 2 back door name plate.
*
Be careful not to damage the vehicle body.
3. REMOVE NO. 3 BACK DOOR NAME PLATE
(a) Put protective tape around the No. 3 back door name plate.
Text in Illustration
(b) Using a moulding remover, peel off the double-sided tape to remove the No. 3 back door name plate.
NOTICE:
*
If reusing the name plate, take care not to damage the No. 3 back door name plate.
*
Be careful not to damage the vehicle body.
Installation
EXTERIOR PANELS / TRIM: NAME PLATE: INSTALLATION
HINT
When installing name plates, heat the vehicle body and name plates using a heat light.
Heating Temperature
NOTICE:
Do not heat the vehicle body or name plates excessively.
1. INSTALL NO. 1 BACK DOOR NAME PLATE