RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Text in Illustration
(1) Using a heat light, heat the vehicle body and rear door outside moulding sub-assembly.
(2) Remove the release paper from the rear door outside moulding sub-assembly.
HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.
(3) Engage the 8 clips and install the rear door outside moulding sub-assembly.
(g) Install the nut and hole plug.
2. INSTALL REAR DOOR NO. 3 WEATHERSTRIP
(a) Engage the 6 clips and install the rear door No. 3 weatherstrip.
3. INSTALL REAR DOOR LOWER OUTSIDE MOULDING
(a) Install 4 new clips (quarter vent louver retainer) to the rear door lower outside moulding.
(b) Engage the 4 clips and 5 claws to install the rear door lower outside moulding.
(c) Engage the clip and connect the No. 2 access panel weatherstrip.
4. INSTALL FRONT DOOR OUTSIDE MOULDING SUB-ASSEMBLY