RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
19. INSTALL ENGINE ROOM SIDE COVER LH (for AWD) See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation
20. REMOVE REAR WHEELS
21. REMOVE TEMPERATURE SWITCH
See: Engine, Cooling and Exhaust/Cooling System/Engine - Coolant Temperature Sensor/Switch/Temperature Switch (Warning
Indicator)/Service and Repair/Removal
22. REMOVE TAIL EXHAUST PIPE ASSEMBLY See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and Repair/Removal
23. REMOVE HEATER COVER See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and Repair/Removal
24. REMOVE CENTER EXHAUST PIPE ASSEMBLY See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and
Repair/Removal
25. SEPARATE REAR SPEED SENSOR WIRE RH (for 2WD) See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Wheel Speed Sensor/Service and Repair/Rear Speed Sensor/Removal
26. SEPARATE REAR SPEED SENSOR WIRE LH (for 2WD)
HINT
Perform the same procedure as the LH side.
27. SEPARATE REAR SPEED SENSOR LH (for AWD) See: Steering and Suspension/Suspension/Rear Knuckle/Service and Repair/Removal
28. SEPARATE REAR SPEED SENSOR RH (for AWD)
HINT
Perform the same procedure as the LH side.
29. REMOVE REAR AXLE SHAFT NUT LH (for AWD) See: Maintenance/Wheels and Tires/Wheel Hub/Service and Repair/Rear Axle
Hub/Removal
30. REMOVE REAR AXLE SHAFT NUT RH (for AWD)
HINT
Perform the same procedure as the LH side.
31. REMOVE REAR SUSPENSION ARM COVER LH
w/o Air Suspension: See: Steering and Suspension/Suspension/Control Arm/Service and Repair/Rear Lower Arm/Removal
w/ Air Suspension: See: Steering and Suspension/Suspension/Control Arm/Service and Repair/Rear Lower Arm/Removal
32. REMOVE REAR SUSPENSION ARM COVER RH
HINT
Perform the same procedure as the LH side.
33. REMOVE REAR DRIVE SHAFT ASSEMBLY LH (for AWD) See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Service and Repair/Removal and Replacement/Rear Drive Shaft Assembly/Removal
34. REMOVE REAR DRIVE SHAFT ASSEMBLY RH (for AWD)
HINT
Perform the same procedure as the LH side.
35. DRAIN BRAKE FLUID See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and Repair/Rear Brake Flexible
Hose/Removal
36. SEPARATE REAR FLEXIBLE HOSE LH
(a) Using a union nut wrench, disconnect the brake line from the rear flexible hose LH.