RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
57. REMOVE REAR UPPER CONTROL ARM ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
58. REMOVE REAR TRACTION WITH TRANSAXLE MOTOR ASSEMBLY (for AWD) See: Transmission and Drivetrain/Continuously
Variable Transmission/Transaxle/Service and Repair/Removal and Replacement/Q211 Hybrid Transaxle/Rear Traction Motor/Removal
59. REMOVE DIFFERENTIAL MOUNT CUSHION (for AWD)
(a) Using SST, remove the differential mount cushion from the rear suspension member sub-assembly.
Text in Illustration
SST : 09570-48010
NOTICE:
*
Before using SST, apply grease to the SST bolts.
*
Install the SST bolts straight and tighten them equally.
60. REMOVE REAR SUSPENSION MEMBER FRONT BODY MOUNTING CUSHION (for LH Side)
(a) Using a chisel and hammer, bend the 2 portions of the rear suspension member front body mounting cushion rib.
Text in Illustration
NOTICE:
Make sure to bend the 2 portions of the cushion rib until the claws of SST can fit securely.
(b) Install SST as shown in the illustration.
SST : 09830-10010
09830-01010