RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
(b) Remove the 2 bolts and the 2 rope hook assemblies.
38. REMOVE RECLINING REMOTE CONTROL BEZEL LH
(a) Using moulding remover A, disengage the 2 bottom claws of the reclining remote control bezel LH.
(b) Lift the reclining remote control bezel LH as shown by the arrow (1) in the illustration.
(c) Turn the reclining remote control bezel LH as shown by the arrow (2) in the illustration, then disengage the 2 upper claws and remove the
bezel.
39. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
(a) Remove the 2 screws.
(b) Remove the 4 clips.
(c) Disengage the 5 claws and 2 clips.
(d) Disconnect each connector and remove the deck trim side panel assembly LH.
40. DISCONNECT REAR SEAT OUTER BELT ASSEMBLY LH See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Removal
and Replacement/Rear Seat Outer Belt Assembly/Removal
41. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH
(a) Disengage the claw and 8 clips.
HINT