RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
10. REMOVE REAR DOOR FRAME GARNISH See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Overhaul/Disassembly
11. REMOVE REAR DOOR TRIM BRACKET See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Overhaul/Disassembly
12. REMOVE REAR DOOR SERVICE HOLE COVER See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Overhaul/Disassembly
13. REMOVE REAR DOOR GLASS RUN See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Overhaul/Disassembly
14. REMOVE REAR DOOR WINDOW REAR GUIDE SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Overhaul/Disassembly
15. REMOVE REAR DOOR REAR GUIDE SEAL See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Overhaul/Disassembly
16. REMOVE REAR DOOR GLASS SUB-ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Overhaul/Disassembly
17. REMOVE REAR DOOR LOCK ASSEMBLY
(a) Using a T30 "TORX" socket wrench, remove the 3 screws.
(b) Move the rear door lock assembly downward and pull the release plate out of the rear door outside handle frame.
(c) Remove the door lock wiring harness seal from the rear door lock assembly.
(d) Using a screwdriver, disengage the claw.
HINT
Tape the screwdriver tip before use.
(e) Remove the rear door lock remote control cable assembly.
(f) Using a screwdriver, disengage the 3 claws.