RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Seat Heater Switch: Service and Repair
Removal
SEAT: SEAT HEATER SWITCH: REMOVAL
1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal
and Replacement/Removal
2. REMOVE SEAT HEATER SWITCH ASSEMBLY
(a) Move the shift lever to N.
(b) Pull the upper console panel sub-assembly in the direction indicated by the arrow to disengage the 4 claws and 4 clips.
(c) Disengage the 4 claws as shown in the illustration.
(d) Disconnect each connector and remove the seat heater switch assembly.
3. REMOVE SEAT HEATER SWITCH
(a) Disengage the 4 claws and 3 guides, and remove the seat heater switch as shown in the illustration.