RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Spoiler: Service and Repair
Installation
EXTERIOR PANELS / TRIM: REAR SPOILER: INSTALLATION
1. INSTALL CENTER STOP LIGHT ASSEMBLY See: Lighting and Horns/Center Mounted Brake Lamp/Service and Repair/Installation
2. INSTALL REAR NO. 1 SPOILER COVER See: Lighting and Horns/Center Mounted Brake Lamp/Service and Repair/Installation
3. INSTALL REAR SPOILER SUB-ASSEMBLY
(a) Install the 2 pins.
(b) Install a new clip.
(c) Engage the clip and 2 pins to install the rear spoiler sub-assembly.
(d) Install the 5 nuts.
Torque : 5.9 Nm (60 kgf-cm, 52 in-lbf)
(e) Install the 2 hole plugs.
(f) Connect each connector.
4. INSTALL UPPER BACK WINDOW PANEL TRIM See: Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Overhaul/Reassembly