RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Repair/Removal and Replacement/Installation
14. INSTALL NO. 2 CONSOLE BOX DUCT See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Installation
15. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Removal and Replacement/Installation
16. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
18. INSTALL REAR DECK FLOOR BOX See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
19. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)
See: Steering and Suspension/Suspension/Suspension Control ( Automatic - Electronic )/Testing and Inspection/Scan Tool Testing and
Procedures/Test Mode Procedure
20. PERFORM YAW RATE AND ACCELERATION SENSOR ZERO POINT CALIBRATION
See: Testing and Inspection/Programming and Relearning/Calibration
21. CHECK FOR YAW RATE AND ACCELERATION SENSOR SIGNAL
See: Testing and Inspection/Scan Tool Testing and Procedures/Test Mode Procedure