RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Text in Illustration
(b) Ensure that the brake booster pump collar is positioned as shown in the illustration.
Text in Illustration
NOTICE:
After installing the brake booster pump, make sure that the collar dose not fall off.
(c) Install the brake booster pump bushing and a new brake actuator bracket clamp to the brake booster pump.
Text in Illustration
NOTICE:
Make sure to securely insert the brake booster pump until the claws of the clamp are engaged.
(d) Install the the brake booster pump clamp.
3. INSTALL BRAKE ACTUATOR
NOTICE:
If installing a new brake actuator, do not remove the hole plugs before connecting the brake lines because the brake actuator
assembly is filled with brake fluid.
(a) Install the 2 cushions and 2 spacers to the No. 1 brake actuator bracket.