RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
12. REMOVE INTAKE AIR RESONATOR SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
13. REMOVE INLET NO. 2 AIR CLEANER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
14. REMOVE INLET NO. 1 AIR CLEANER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
15. REMOVE AIR CLEANER ASSEMBLY WITH HOSE See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
16. DISCONNECT NO. 1 RESERVOIR HOSE
(a) Slide the clip and disconnect the No. 1 reservoir hose from the brake master cylinder sub-assembly.
17. DISCONNECT NO. 2 RESERVOIR HOSE
(a) Slide the clip and disconnect the No. 2 reservoir hose from the brake master cylinder sub-assembly.
18. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
19. REMOVE BRAKE PEDAL RETURN SPRING See: Brake Pedal Assy/Service and Repair/Removal and Replacement/Removal
20. SEPARATE MASTER CYLINDER PUSH ROD CLEVIS See: Brake Pedal Assy/Service and Repair/Removal and Replacement/Removal
21. REMOVE BRAKE MASTER WITH SIMULATOR CYLINDER ASSEMBLY
(a) Disconnect the connector and disengage the clamp.
(b) Using a union nut wrench, disconnect the No. 6 front brake tube and No. 7 front brake tube from the brake master with simulator cylinder
assembly.