RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
(b) Remove the clamp.
(c) Pull out the No. 1 parking brake cable assembly toward the cabin.
(d) Disconnect the parking brake switch connector.
(e) Disengage the 2 clamps to separate the wire harness clamp.
(f) Remove the 3 nuts and parking brake control pedal assembly.
Installation
PARKING BRAKE: PARKING BRAKE PEDAL: INSTALLATION
1. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY
(a) Install the parking brake control pedal assembly with the 3 nuts.