RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
(d) Remove the bolt and No. 2 sensor clamp from the body.
Text in Illustration
(e) Remove the bolt, No. 1 sensor clamp and front brake flexible hose together from the shock absorber assembly.
Text in Illustration
(f) Remove the bolt, resin clamp and front speed sensor.
Text in Illustration
NOTICE:
*
Prevent foreign matter from attaching to the front speed sensor tip.
*
Clean the speed sensor installation hole and the contact surfaces every time the front speed sensor is removed.
Installation
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: FRONT SPEED SENSOR: INSTALLATION
HINT
*
Use the same procedure for the LH side and RH side.
*
The following procedure is for the LH side.