RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
NOTICE:
Uniformly loosen the bolts while keeping the camshaft level.
HINT
Arrange the removed parts in the correct order.
(d) Remove the 5 camshaft bearing caps.
56. REMOVE NO. 3 CAMSHAFT SUB-ASSEMBLY
(a) Remove the No. 3 camshaft sub-assembly.
57. REMOVE NO. 4 CAMSHAFT SUB-ASSEMBLY
(a) Remove the No. 4 camshaft sub-assembly.
58. REMOVE CAMSHAFT HOUSING SUB-ASSEMBLY LH
(a) Remove the camshaft housing sub-assembly LH by prying between the cylinder head and camshaft housing sub-assembly LH with a
screwdriver.
Text in Illustration
NOTICE:
Be careful not to damage the contact surfaces of the cylinder head and camshaft housing sub-assembly LH.
HINT
Tape the screwdriver tip before use.
59. INSPECT CAMSHAFT TIMING GEAR ASSEMBLY See: Testing and Inspection/Engine Unit