RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
_hybrid/Page-684001.png)
Variable Valve Timing Actuator: Service and Repair
Installation
2GR-FXE ENGINE CONTROL: CAMSHAFT OIL CONTROL VALVE: INSTALLATION
1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1)
(a) Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly.
Text in Illustration
(b) Install the camshaft timing oil control valve assembly with the bolt.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
NOTICE:
Make sure that the O-ring is not cracked or does not jump out of position during installation.
(c) Connect the camshaft timing oil control valve assembly connector.
2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)
(a) Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly.
Text in Illustration
(b) Install the camshaft timing oil control valve assembly with the bolt.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
NOTICE:
Make sure that the O-ring is not cracked or does not jump out of position during installation.
(c) Connect the camshaft timing oil control valve assembly connector.
