RX 450h AWD V6-35L (2GR-FXE) Hybrid (2011) Exhaust System Actuator - Service and Repair
Text in Illustration
(e) Connect the 2 heater hoses.
2. INSTALL TEMPERATURE SWITCH See: Cooling System/Engine - Coolant Temperature Sensor/Switch/Temperature Switch (Warning
Indicator)/Service and Repair/Installation
3. ADD ENGINE COOLANT (for Engine) See: Cooling System/Coolant/Service and Repair/Coolant (for Engine)
4. INSTALL FRONT FLOOR COVER LH See: Exhaust Manifold/Service and Repair/Installation
5. INSTALL HEATER COVER See: Exhaust Pipe/Service and Repair/Installation
6. INSPECT FOR COOLANT LEAK (for Engine) See: Cooling System/Testing and Inspection/Component Tests and General Diagnostics/Cooling
System
7. INSTALL NO. 1 ENGINE UNDER COVER
8. INSTALL V-BANK COVER SUB-ASSEMBLY See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation
9. INSTALL COOL AIR INTAKE DUCT SEAL See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation
10. INSTALL ENGINE ROOM SIDE COVER LH See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation
11. INSTALL ENGINE ROOM SIDE COVER See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation