RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
Installation
HEATING / AIR CONDITIONING: AMBIENT TEMPERATURE SENSOR: INSTALLATION
1. INSTALL AMBIENT TEMPERATURE SENSOR
(a) Engage the clamp to install the ambient temperature sensor.
(b) Connect the connector.
2. INSTALL FRONT BUMPER ASSEMBLY See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
3. INSTALL HOOD CENTER CUSHION See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Installation
4. INSTALL COOL AIR INTAKE DUCT SEAL See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
5. INSTALL ENGINE ROOM SIDE COVER See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
6. INSTALL ENGINE ROOM SIDE COVER LH See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
7. ADD WINDSHIELD WASHER FLUID (w/ Headlight Cleaner System) See: Wiper and Washer Systems/Headlamp Washer Spray
Nozzle/Service and Repair/Headlight Cleaner Actuator/Installation
8. PREPARE VEHICLE FOR FOG LIGHT AIMING ADJUSTMENT See: Lighting and Horns/Fog/Driving Lamp/Adjustments
9. PREPARE FOR FOG LIGHT AIMING See: Lighting and Horns/Fog/Driving Lamp/Adjustments
10. INSPECT FOG LIGHT AIMING See: Lighting and Horns/Fog/Driving Lamp/Adjustments
11. ADJUST FOG LIGHT AIMING See: Lighting and Horns/Fog/Driving Lamp/Adjustments