RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
(k) Separate the nut and heater pipe.
(l) Remove the 2 nuts and water hose bracket.
(m)Remove the 2 nuts and bolt shown in the illustration and remove the No. 3 wire frame from the cabin.
(n) Remove the nut shown in the illustration. (for AWD)
(o) Remove the 3 nuts shown in the illustration.
(p) Remove the 2 clamps as shown in the illustration and remove the No. 3 wire frame from the cabin.
(q) w/ Active Stabilizer System:
(1) Disconnect the 3 connectors (A) as shown in the illustration.