RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)
NOTICE:
*
Make sure that the ends of the No. 3 wire frame do not cross over each other.
*
Be sure to connect the No. 3 wire frame to each correct terminal as shown in the illustration.
2. CHECK HIGH VOLTAGE CABLE CONNECTION See: Battery System, Hybrid Drive/Battery, Hybrid Drive/Service and Repair/Installation
3. INSTALL BATTERY COVER SUB-ASSEMBLY
HINT
See: Battery System, Hybrid Drive/Battery, Hybrid Drive/Service and Repair/Installation.
4. INSTALL SERVICE PLUG GRIP See: Battery System, Hybrid Drive/Hybrid Battery Service Switch/Service and Repair/Service Plug
Grip/Installation
5. INSTALL BATTERY SERVICE HOLE COVER See: Battery System, Hybrid Drive/Hybrid Battery Service Switch/Service and Repair/Service
Plug Grip/Installation
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.