RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
(a) Remove the 2 bolts and No. 1 inverter reserve tank bracket.
11. REMOVE INVERTER TERMINAL COVER
CAUTION:
Wear insulating gloves.
(a) Remove the 11 bolts and inverter terminal cover.
NOTICE:
Make sure to pull the inverter cover straight up, as a connector is connected to the bottom of the cover.
12. CHECK TERMINAL VOLTAGE
CAUTION:
Wear insulating gloves.
NOTICE:
*
Insulate the removed terminals with insulating tape.
*
Do not allow any foreign objects or water to enter the inverter with converter assembly.
(a) Using a voltmeter, measure the voltage between the 2 terminals.
Standard voltage:
0 V
HINT
Use a measuring range of DC 750 V or more on the voltmeter.
13. DISCONNECT NO. 4 ENGINE WIRE
CAUTION:
Wear insulating gloves.
NOTICE:
*
Insulate the removed terminals with insulating tape.
*
Cover the hole where the cable was connected with tape or equivalent (non-residue type) to prevent entry of foreign matter.
(a) Remove the 5 bolts, and disconnect the No. 4 engine wire (high voltage cables of the air conditioning) from the inverter with converter
assembly.