RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Oil Pressure Sender: Testing and Inspection
2GR-FXE LUBRICATION: OIL PRESSURE SWITCH: INSPECTION
1. INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY
(a) Disconnect the oil pressure switch assembly connector.
(b) Put the engine in inspection mode See: Testing and Inspection/Component Tests and General Diagnostics.
(c) Start the engine.
(d) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the oil pressure switch assembly.
(e) Reconnect the oil pressure switch assembly connector.