RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Dimmer Switch: Service and Repair
Installation
METER / GAUGE / DISPLAY: LIGHT CONTROL RHEOSTAT: INSTALLATION
1. INSTALL TRIP AND RHEOSTAT SWITCH ASSEMBLY
(a) Install the trip and rheostat switch assembly with the 2 screws.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY See: Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
3. INSTALL NO. 1 SWITCH HOLE BASE See: Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Installation
4. INSTALL INSTRUMENT PANEL GARNISH LH See: Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Air Suspension)
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
6. INSTALL REAR DECK FLOOR BOX (w/ Air Suspension) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation
7. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)
(a) Inspect the suspension control system See: Steering and Suspension/Suspension/Suspension Control ( Automatic - Electronic )/Testing and
Inspection/Scan Tool Testing and Procedures/Test Mode Procedure.