RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
*
Wear protective gloves.
*
Be careful as the radiator hoses are hot.
*
Keep your hands away from the cooling fans.
NOTICE:
*
Make sure that the radiator reservoir still has some coolant in it.
*
If the coolant temperature gauge indicates an excessive temperature, turn off the engine and let it cool.
*
If there is not enough coolant, the engine may overheat or be seriously damaged.
*
If the radiator reservoir does not have enough coolant, perform the following: 1) stop the engine, 2) wait until the coolant has
cooled down, and 3) add coolant until the reservoir is filled to the full line.
(j) Stop the engine and wait until the engine coolant cools down.
(k) Add engine coolant to the full line on the radiator reservoir.
9. INSPECT FOR COOLANT LEAK (for Engine) See: Engine, Cooling and Exhaust/Cooling System/Testing and Inspection/Component Tests and
General Diagnostics/Cooling System
10. INSTALL NO. 1 ENGINE UNDER COVER
11. INSTALL V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation
12. INSTALL COOL AIR INTAKE DUCT SEAL See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
13. INSTALL ENGINE ROOM SIDE COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
14. INSTALL ENGINE ROOM SIDE COVER LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation