RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Body Control Module: Service and Repair
Installation
POWER DISTRIBUTION: MAIN BODY ECU: INSTALLATION
1. INSTALL MULTIPLEX NETWORK BODY ECU
NOTICE:
*
Make sure that no foreign objects get on the connecting surfaces.
*
Do not touch the ECU connector.
(a) Insert the multiplex network body ECU up to the position it contacts the housing sidewall of the guide part as shown in the illustration.
Text in Illustration
HINT
Make sure to keep the angle 20o or more as shown in the illustration.
(b) Slide the guide of the multiplex network body ECU along the housing sidewall toward the junction block fuses as shown in the illustration.
Text in Illustration
(c) Slide the multiplex network body ECU so that it contacts side A as shown in the illustration.
Text in Illustration
NOTICE:
Do not apply excessive force to the multiplex network body ECU.
(d) While contacting the multiplex network body ECU to side A of the junction block (point of rotation), rotate it downward as shown in the