RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (GROUND TERMINAL)
OK -- REPLACE POWER MANAGEMENT CONTROL ECU See: Power and Ground Distribution/Power Distribution
Module/Service and Repair/Removal
Skid Control ECU Communication Stop Mode
NETWORKING: CAN COMMUNICATION SYSTEM: Skid Control ECU Communication Stop Mode
- Skid Control ECU Communication Stop Mode
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
NOTICE:
*
Turn the power switch off before measuring the resistances between CAN bus main wires and between CAN bus branch wires.
*
Turn the power switch off before inspecting CAN bus wires for a ground short.
*
After the power switch is turned off, check that the key reminder warning system and light reminder warning system are not