RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
2. CHECK HARNESS AND CONNECTOR (POWER SOURCE TERMINAL)
(a) Turn the power switch on (IG).
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (POWER SOURCE CIRCUIT)
OK -- Continue to next step.
3. CHECK HARNESS AND CONNECTOR (GROUND TERMINAL)
(a) Turn the power switch off.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (GROUND CIRCUIT)
OK -- REPLACE SPIRAL CABLE WITH STEERING ANGLE SENSOR See: Brakes and Traction Control/Antilock Brakes /
Traction Control Systems/Steering Angle Sensor/Service and Repair/Removal
Yaw Rate Sensor Communication Stop Mode
NETWORKING: CAN COMMUNICATION SYSTEM: Yaw Rate Sensor Communication Stop Mode
- Yaw Rate Sensor Communication Stop Mode
DESCRIPTION