RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
NOTICE:
Be sure to read Precaution thoroughly before servicing See: Steering and Suspension/Suspension/Service Precautions/Air
Suspension System.
2. REMOVE FRONT FLOOR COVER LH See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Manifold/Service and Repair/Removal
3. REMOVE OXYGEN SENSOR
(a) Disconnect the 2 wire harness clamps and oxygen sensor connector.
(b) Disconnect the wire harness clamp.
(c) Using SST, remove the oxygen sensor from the No. 3 front exhaust pipe sub-assembly.
SST : 09224-00010
4. REMOVE NO. 3 FRONT EXHAUST PIPE SUB-ASSEMBLY
(a) Remove the 2 bolts and 2 compression springs.
(b) Remove the 2 bolts, 2 nuts and No. 3 front exhaust pipe sub-assembly.
(c) Remove the 3 gaskets from the No. 3 front exhaust pipe sub-assembly.
5. REMOVE FRONT EXHAUST PIPE ASSEMBLY See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and
Repair/Removal
6. REMOVE NO. 2 OXYGEN SENSOR
(a) Remove the wire harness clamp bracket.