RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Evaporative Emission Control Canister: Service and Repair
Removal
2GR-FXE EMISSION CONTROL: CANISTER: REMOVAL
1. PRECAUTION (w/ Air Suspension)
NOTICE:
Be sure to read Precaution thoroughly before servicing See: Steering and Suspension/Suspension/Service Precautions/Suspension
Control System.
2. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
4. REMOVE FRONT CENTER FLOOR COVER
(a) Remove the 7 bolts and 2 screws.
Text in Illustration
(b) Disconnect the 3 clips and remove the front center floor cover.
5. REMOVE REAR ENGINE SERVICE COVER ASSEMBLY
(a) Remove the 2 bolts and rear engine service cover assembly.
6. REMOVE CHARCOAL CANISTER ASSEMBLY
(a) Disconnect the vent line tube from the charcoal canister assembly.