RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Text in Illustration
(c) Perform the following procedure when connecting a fuel tube connector (Quick Type A):
(1) Check if there is any damage or foreign objects on the connecting parts of the pipes.
(2) Line up the 2 parts of the pipes to be connected, and push them together until the connector makes a "click" sound. If the pipe is difficult to
push into the connector, apply a small amount of clean engine oil to the tip of the pipe and reinsert it.
(3) After connecting the pipes, check that the pipe and connector are securely connected by pulling on them.
(4) Inspect for fuel leaks See: Testing and Inspection/Fuel System.
(5) Install the fuel pipe clamp.
Text in Illustration