RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Fuel Gauge Sender: Testing and Inspection
2GR-FXE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSPECTION
1. INSPECT FUEL SENDER GAUGE ASSEMBLY
(a) Remove the fuel sender gauge assembly.
Text in Illustration
(b) Check that the float moves smoothly between F and E.
(c) Disconnect the fuel sender gauge connector.
(d) Measure the resistance between the terminals 1 (FE) and 2 (FS) of connector according to the value(s) in the table below.
Standard Resistance:
If the value is not as specified, replace the fuel sender gauge assembly.