RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Camshaft Position Sensor: Service and Repair
Removal
2GR-FXE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: REMOVAL
1. PRECAUTION (w/ Air Suspension)
NOTICE:
Be sure to read Precaution thoroughly before servicing See: Steering and Suspension/Suspension/Service Precautions/Air
Suspension System.
2. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
(a) Remove the windshield wiper motor and link assembly See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Removal.
3. REMOVE FRONT SHOCK ABSORBER CAP (w/ Air Suspension) See: Steering and Suspension/Suspension/Suspension Strut / Shock
Absorber/Service and Repair/Front Shock Absorber (w/ Air Suspension)/Removal
4. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY See: Brakes and Traction Control/Hydraulic System/Brake Master Cylinder/Service
and Repair/Removal and Replacement/Removal
5. REMOVE V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
6. REMOVE NO. 1 ENGINE UNDER COVER
7. DRAIN ENGINE COOLANT (for Engine) See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair/Coolant (for Engine)
8. REMOVE INTAKE AIR RESONATOR SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Removal
9. REMOVE NO. 2 AIR CLEANER INLET See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
10. REMOVE NO. 1 AIR CLEANER INLET See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
11. REMOVE AIR CLEANER ASSEMBLY See: Fuel Delivery and Air Induction/Throttle Body/Service and Repair/Removal
12. REMOVE INTAKE AIR SURGE TANK ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal
13. REMOVE NO. 2 EGR PIPE See: Emission Control Systems/Exhaust Gas Recirculation/EGR Cooler/Service and Repair/Removal
14. REMOVE EGR DELIVERY CHAMBER See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal
15. REMOVE VVT SENSOR (for Bank 2)
(a) Disconnect the sensor connector.
(b) Remove the bolt and sensor.
16. REMOVE VVT SENSOR (for Bank 1)
(a) Disconnect the sensor connector.
(b) Remove the bolt and sensor.