RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Use the same procedure for the RH side and the LH side See: Accessories and Optional Equipment/Navigation System/Service and
Repair/Navigation Receiver (for HDD)/Removal.
11. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Removal and Replacement/Knee Airbag Assembly (for Front Passenger Side)/Removal
12. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
13. DISCONNECT CONNECTOR HOLDER
(a) Disengage the clamp and disconnect the wire harness.
(b) Remove the nut.
(c) Disengage the claw and disconnect the connector holder.
14. REMOVE ECU INTEGRATION BOX
(a) Remove the bolt, 2 nuts and ECU integration box.
15. REMOVE CLEARANCE WARNING ECU ASSEMBLY
(a) Disengage the 2 claws and remove the clearance warning ECU assembly.
Installation
PARK ASSIST / MONITORING: CLEARANCE WARNING ECU: INSTALLATION
1. INSTALL CLEARANCE WARNING ECU ASSEMBLY
(a) Engage the 2 claws to install the clearance warning ECU assembly.
2. INSTALL ECU INTEGRATION BOX
(a) Install the ECU integration box with the bolt and 2 nuts.
Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)
3. CONNECT CONNECTOR HOLDER
(a) Engage the claw.