RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Cruise Control Module: Service and Repair
Installation
CRUISE CONTROL: DRIVING SUPPORT ECU: INSTALLATION
1. INSTALL DRIVING SUPPORT ECU
(a) Install the driving support ECU with the nut.
Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)
NOTICE:
Do not install the driving support ECU if it has been damaged or impacted in any way.
(b) Engage the clamp.
(c) Connect the connector.
2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation