RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Steering Control Module: Service and Repair
Removal
POWER ASSIST SYSTEMS: POWER STEERING ECU: REMOVAL
CAUTION:
Be sure to read Precaution thoroughly before servicing See: Restraint Systems/Air Bag Systems/Service Precautions.
1. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
2. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY
HINT
Refer to the instructions for Removal of the brake pedal support sub-assembly See: Brakes and Traction Control/Brake Pedal
Assy/Service and Repair/Removal and Replacement/Removal.
3. REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
(a) Disconnect the connectors from the instrument panel junction block assembly and power management control ECU.
(b) Remove the 2 nuts.
(c) Disconnect the connectors from the back of the instrument panel junction block assembly.
4. REMOVE AFS ECU
HINT
Refer to the instructions for Removal of the AFS ECU See: Relays and Modules - Lighting and Horns/Headlamp Alignment Control
Module/Service and Repair/Removal.
5. REMOVE POWER STEERING ECU ASSEMBLY
(a) Remove the 2 nuts, clamp and power steering ECU assembly.
(b) Disconnect the 3 connectors from the power steering ECU assembly.
(c) Disconnect the connector from the power steering ECU assembly.