RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
(c) Disengage the claw and remove the No. 3 connector holder.
(d) Remove the 2 nuts, bolt and ECU integration box RH.
14. REMOVE SKID CONTROL ECU ASSEMBLY See: Relays and Modules - Brakes and Traction Control/Electronic Brake Control
Module/Service and Repair/Removal
15. REMOVE SUSPENSION CONTROL ECU
(a) Remove the 3 bolts and suspension control ECU from the body.
NOTICE:
*
Avoid any impact to the suspension control ECU.
*
Do not drop the ECU. If the ECU is dropped, replace it with a new one.
(b) Disconnect the 3 connectors.