RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Headlamp Washer Motor Relay: Service and Repair
Installation
WIPER / WASHER: RELAY (w/ Headlight Cleaner System): INSTALLATION
1. INSTALL HEADLIGHT CLEANER CONTROL RELAY
(a) Engage the claw to install the headlight cleaner control relay as shown in the illustration.
(b) connect the connector.
2. INSTALL FRONT BUMPER ASSEMBLY See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
3. INSTALL HOOD CENTER CUSHION See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Installation
4. INSTALL COOL AIR INTAKE DUCT SEAL See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
5. INSTALL ENGINE ROOM SIDE COVER See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
6. INSTALL ENGINE ROOM SIDE COVER LH See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
7. ADD WASHER FLUID See: Wiper and Washer Systems/Windshield Washer Motor/Service and Repair/Washer Motor (for Front
Side)/Installation
8. PREPARE VEHICLE FOR FOG LIGHT AIM ADJUSTMENT See: Lighting and Horns/Fog/Driving Lamp/Adjustments
9. PREPARE FOR FOG LIGHT AIMING See: Lighting and Horns/Fog/Driving Lamp/Adjustments
10. INSPECT FOG LIGHT AIMING See: Lighting and Horns/Fog/Driving Lamp/Adjustments
11. ADJUST FOG LIGHT AIMING See: Lighting and Horns/Fog/Driving Lamp/Adjustments