RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
CAUTION:
Make sure that the wires are tight. Looseness in the wires results in the tires breaking loose when the airbag is deployed.
(f) Install SST.
(1) Connect the SST connector.
Text in Illustration
SST : 09082-00700
NOTICE:
To avoid damaging the SST connector or wire harness, do not lock the secondary lock of the twin lock. Also, secure some slack for the
SST wire harness inside the tire.
(2) Move SST at least 10 m (32.8 ft.) away from the airbag tied down to the tire.
(g) Deploy the airbag.
(1) Connect the red clip of SST to the positive (+) battery terminal and the black clip of SST to the negative (-) battery terminal.
(2) Check that no one is within a 10 m (32.8 ft.) radius of the tire to which the front passenger airbag assembly is tied.
(3) Press the SST activation switch and deploy the airbag.
CAUTION:
Before deployment, make sure that no one is near the airbag.
HINT
The airbag is deployed as the LED of the SST activation switch comes on.
(h) Dispose of the front passenger airbag assembly.
CAUTION: