RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Seat Position Sensor: Service and Repair
Removal
SUPPLEMENTAL RESTRAINT SYSTEMS: SEAT POSITION SENSOR: REMOVAL
1. PRECAUTION
CAUTION:
Be sure to read Precaution thoroughly before servicing See: Air Bag Systems/Service Precautions.
2. REMOVE REAR DECK FLOOR BOX See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
3. REMOVE FRONT SEAT HEADREST ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat
Assembly/Removal
4. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER LH See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly/Removal
5. REMOVE FRONT INNER SEAT TRACK BRACKET COVER LH See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly/Removal
6. REMOVE REAR OUTER SEAT TRACK BRACKET COVER LH See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly/Removal
7. REMOVE REAR INNER SEAT TRACK BRACKET COVER LH See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly/Removal
8. REMOVE FRONT SEAT ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat
Assembly/Removal
9. REMOVE SEAT POSITION SENSOR
(a) Disconnect the connector.
(b) Using a T30 "TORX" socket wrench, remove the "TORX" screw and seat position sensor with the seat slide position sensor protector.
(c) Remove the seat position sensor from the seat slide position sensor protector as shown in the illustration.