RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Accelerator Pedal Position Sensor: Service and Repair
Installation
HYBRID / BATTERY CONTROL: ACCELERATOR PEDAL SENSOR: INSTALLATION
1. INSTALL ACCELERATOR PEDAL ASSEMBLY
(a) Install the accelerator pedal assembly with the 2 nuts.
Torque : 4.9 Nm (50 kgf-cm, 43 in-lbf)
NOTICE:
Avoid physical shocks to the accelerator pedal assembly.
(b) Connect the accelerator pedal assembly connector.
2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation