RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Suspension Mode Switch: Service and Repair
Height Control Switch (for Luggage Compartment)
Components
SUSPENSION CONTROL: HEIGHT CONTROL SWITCH (for Luggage Compartment): COMPONENTS
Removal
SUSPENSION CONTROL: HEIGHT CONTROL SWITCH (for Luggage Compartment): REMOVAL
1. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. REMOVE REAR DECK FLOOR BOX See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
4. REMOVE HEIGHT CONTROL SWITCH
(a) Disengage the 2 claws to remove the height control switch from the deck trim side panel assembly RH.