RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Washer Fluid Level Switch: Service and Repair
Installation
WIPER / WASHER: WASHER LEVEL WARNING SWITCH: INSTALLATION
1. INSTALL WASHER LEVEL WARNING SWITCH ASSEMBLY
(a) Install the washer level warning switch assembly.
(b) Connect the connector.
(c) Connect the washer hose.
2. ADD WASHER FLUID See: Wiper and Washer Systems/Windshield Washer Motor/Service and Repair/Washer Motor (for Front
Side)/Installation
3. INSTALL FRONT FENDER LINER RH See: Wiper and Washer Systems/Windshield Washer Motor/Service and Repair/Washer Motor (for
Front Side)/Installation
4. INSTALL FRONT WHEEL RH
Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)