RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
(c) Remove the power point socket assembly and power point socket cover in the direction shown in the illustration.
(d) Using a screw driver, disengage the claw and remove the power point socket assembly from the power point socket cover as shown in the
illustration.
Installation
POWER OUTLETS (INT): CENTER POWER OUTLET SOCKET: INSTALLATION
1. INSTALL POWER POINT SOCKET ASSEMBLY
(a) Engage the 2 claws to install a new power point socket cover.
(b) Engage the claws to install the power point socket assembly.
(c) Connect the connector.
2. INSTALL STEREO JACK ADAPTER ASSEMBLY See: Accessories and Optional Equipment/Entertainment Systems/Auxiliary Input / Output
Jack/Service and Repair/Installation
3. INSTALL FRONT CONSOLE UPPER PANEL GARNISH See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Overhaul/Reassembly
4. INSTALL LOWER CONSOLE BOX POCKET See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Overhaul/Reassembly
5. INSTALL CONSOLE COMPARTMENT BOX (w/ Seat Heater System) See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Overhaul/Reassembly
6. INSTALL CONSOLE COIN BOX See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Overhaul/Reassembly
7. INSTALL REAR CONSOLE BOX ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Installation
8. INSTALL MULTI-MEDIA INTERFACE ECU ASSEMBLY (w/ USB Audio System) See: Accessories and Optional Equipment/Entertainment