RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Suspension Control Module: Service and Repair
Installation
SUSPENSION CONTROL: SUSPENSION CONTROL ECU: INSTALLATION
1. INSTALL SUSPENSION CONTROL ECU
(a) Connect the 3 connectors.
(b) Install the suspension control ECU to the body with the 3 bolts.
Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)
NOTICE:
*
Avoid any impact to the suspension control ECU.
*
Do not drop the ECU. If the ECU is dropped, replace it with a new one.
*
If the suspension control ECU is replaced with a new one, perform registration of vehicle identification information See:
Suspension/Suspension Control ( Automatic - Electronic )/Testing and Inspection/Programming and Relearning/Registration.
2. INSTALL SKID CONTROL ECU ASSEMBLY See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Electronic Brake
Control Module/Service and Repair/Installation
3. INSTALL ECU INTEGRATION BOX RH
(a) Install the ECU integration box RH with the 2 nuts and bolt.
(b) Install the No. 3 connector holder with the nut and claw.
(c) Connect each connector.
4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Installation
5. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and