RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
HINT
This operation is necessary to prevent damage to the spiral cable.
5. SEPARATE STEERING INTERMEDIATE SHAFT ASSEMBLY
(a) Put matchmarks on the steering intermediate shaft assembly and steering link assembly.
Text in Illustration
NOTICE:
Do not separate the steering intermediate shaft assembly from the steering link assembly.
(b) Remove the bolt.
(c) Separate the steering intermediate shaft assembly from the steering link assembly.
6. SEPARATE TIE ROD ASSEMBLY LH
(a) Remove the cotter pin and nut.
(b) Install SST to the tie rod end.
SST : 09960-20010
09961-02060
NOTICE:
Make sure that the upper ends of the tie rod end and SST are aligned.
(c) Using SST, separate the tie rod end from the steering knuckle.