RX 450h AWD V6-3.5L (2GR-FXE) Hybrid (2011)
Do not twist the rear speed sensor wire RH when installing it.
6. INSTALL REAR SPEED SENSOR RH (for AWD)
HINT
Perform the same procedure as the rear speed sensor wire RH.
7. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH (w/ HID, LED Headlight System)
(a) Install the rear height control sensor sub-assembly RH to the rear upper control arm assembly RH with the bolt.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
8. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH (w/ Air Suspension)
(a) Install the rear height control sensor sub-assembly LH to the rear upper control arm assembly LH with the bolt.
Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)
9. INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY
HINT
Refer to the procedures from Install Rear Suspension Member Sub-assembly See: Cross-Member/Rear Cross-Member/Service and
Repair/Installation.